Advantages of marble polishing for homes

Marble is a very attractive stone used in floorings, countertops, sculptures, pillars and mouldings. All that beauty requires some rather specific maintenance and care to keep it looking so good. Marble isn’t quite as resilient as granite or quartz, but can still hold up to normal usage without too much issue as long as the proper precautions are made.

Although many marble polishing service providing companies are very vigilant about cleaning and getting the floors to shine, they too make certain mistakes. Even if you are DIY cleaning and polishing your marble floors, you might be making these mistakes.

Common Mistakes made during Marble Floor Polishing:

Not using Carpets or Matts: Dirt, mud and sand are abrasive on marble stone flooring and can scratch the surface over time. It’s a good idea to keep doormats inside as well as outside to try catching this debris and prevent these scuffs from happening. It’s also good to be mindful of what you’re tracking in and wiping your feet as best as you can within reason before walking on your marble flooring. A dry, clean dust mop works great to remove any dirt that has been tracked in and won’t scratch the floors in the process. Run the dry mop in a single direction, not back and forth in order to best collect all the debris. A vacuum is not recommended, as it can contribute to these scratches over time.

Using acidic cleaning solutions: Vinegar and other acidic cleaning solutions should never be used on marble or any other natural stone, as they will dull the professional finish and eat away at the surface of the stone and lead to etching. Etching can often look like watermarks or a surface stain, but in reality, these are chemical burns that have damaged the surface. If severe enough, this can require the help of a professional stone restoration specialist to fix, which is an expensive proposition. Sealing your stone is your first line of defence here, but acidic chemicals will strip away and damage your protective sealer as well, opening you up to stains and etching in the future. This is why it’s so important to use cleaning products that are specially formulated for use on marble and other natural stone.

Letting the Stains Stay: Like all-natural stones, marble is a naturally porous material and can allow water and other liquids to seep beneath the surface. This can lead to difficult-to-remove stains and build-up of bacteria if you’re not careful. That’s why we recommend to always wipe up spills immediately, as even water can leave temporary dark spots in the stone if allowed to sit on an unsealed surface.

Avoiding Sealing: All the beauty and prestige of marble comes with the unfortunate reality that it is a more porous material than other natural stone, such as granite. With that being the case, it’s even more Sealing is important to maintain the protective seal that was applied when the stone was installed. This is imperative in order to maintain the lustre and clean look of that marble you invested so much in.

The marble polishing services can help in saving time, the cost to buy the supplies and the manual labour that would go into polishing. The professional services can help in achieving the mirror shine finish.

To book a marble polish service or enquire more: visit www.themaids.in